Aplikasi Building Information Modelling (BIM) 5D pada Pembangunan Gedung Bali International Hospital (Gedung B)
Keywords:
Building Information Modeling, Autodesk Revit, International Hospital, Navisworks ManageAbstract
In the 4.0 era, technological developments are needed in sustainable construction, such as in the Bali International Hospital construction infrastructure project using Building Information Modeling (BIM). The use of BIM is able to minimize and avoid miss communication and errors in reading data between scientific disciplines and can also reduce time and costs in the construction of construction projects. Autodesk Revit is one part of the BIM software. which allows users to be able to plan building construction in 3D both architecturally, structurally, and MEP as well as integrating data such as cost budgets, project schedules, and material specifications into the model to be more accurate. In the Bali International Hospital project, the use of Autodesk Revit software is only limited to 3D modeling, not to bring up the results of quantity take off, in this study will be studied related to the use of Autodesk Revit software in scheduling (BIM 4D), quantity take off and Budget Plan (BIM 5D). The research steps include data collection, 3d modeling with autodesk revit 2021 software, clash detection, Quantity take off for cost budget plan, scheduling plan using ms project, scheduling simulation with navisworks manage 2021. The application of BIM in the Bali International Hospital construction project (Building B), obtained 3d modeling consisting of foundation work up to the construction of the building.
References
H. Parung et al., “Sosialisasi dan Pelatihan Aplikasi Teknologi Building Information Modelling (BIM) Pada Dinas Pekerjaan Umum dan Penataan Ruang (PUPR) Kabupaten Gowa,” J. Tepat (Teknologi Terap. Untuk Pengabdi. Masyarakat), vol. 4, no. 2, pp. 261–270, 2021.
Fakhruddin et al., “Sosialisasi Aplikasi Teknologi Building Information Modelling (BIM) pada Sektor Konstruksi Indonesia,” J. TEPAT Appl. Technol. J. Community Engagem. Serv., vol. 2, no. 2, pp. 112–119, 2019, doi: 10.25042/jurnal_tepat.v2i2.82.
S. Sangadji, S. A. Kristiawan, and I. K. Saputra, “Pengaplikasian Building Information Modeling (BIM) Dalam Desain Bangunan Gedung,” Matriks Tek. Sipil, vol. 7, no. 4, pp. 381–386, 2019, doi: 10.20961/mateksi.v7i4.38475.
R. D. Novita and E. K. Pangestuti, “Analisa Quantity Take Off Dan Rencana Anggaran Biaya Dengan Metode Building Information Modeling (BIM) Menggunakan Software Autodeks Revit 2019 (Studi Kasus: Gedung LP3 Universitas Negeri Semarang),” Din. Tek. Sipil Maj. Ilm. Tek. Sipil, vol. 14, no. 1, pp. 27–31, 2021, doi: 10.23917/dts.v14i1.15276.
M. Fadillah and Nofriadi, “Quantity Take-Off Pekerjaan Struktur Berbasis Building Information Modeling (BIM) Pembangunan Gedung Kantor Pelayanan Pajak Pratama Balige,” J. Ilm. Tek. Sipil, vol. 2, no. 1, pp. 24–34, 2022, [Online]. Available: https://doi.org/10.51510/agregat.v2i1.733
I. A. Reista, A. Annisa, and I. Ilham, “Implementasi Building Information Modelling (BIM) dalam Estimasi Volume Pekerjaan Struktural dan Arsitektural,” J. Sustain. Constr., vol. 2, no. 1, pp. 13–22, 2022, doi: 10.26593/josc.v2i1.6135.
A. Anjani, H. Riakara Husni, and C. Niken, “Penerapan Building Information Modeling (BIM) Menggunakan Software Autodesk Revit Pada Gedung 4 Rumah Sakit Pendidikan Peguruan Tinggi Negeri (RSPTN) Universitas Lampung,” Jrsdd, vol. 10, no. 1, pp. 87–098, 2022.
R. Ferial, B. Hidayat, R. C. Pesela, and D. Daoed, “Quantity take-off berbasis building information modeling (bim) studi kasus: gedung bappeda padang,” J. Rekayasa Sipil, vol. 17, no. 3, p. 228, 2022, doi: 10.25077/jrs.17.3.228-238.2021.
I. Sadad et al., “Implementasi Building Information Modelling untuk Quantity Take Off Material Struktur Abutment,” JIMPS J. Ilm. Mhs. Pendidik. Sej., vol. 8, no. 4, p. 2023, 2023, [Online]. Available: http://jim.unsyiah.ac.id/sejarah/mm
F. Ferry and I. Indrastuti, “Penerapan Building Information Modelling (Bim) Pada Proyek Pembangunan Workshop (Studi Kasus: Proyek Pembangunan Workshop Kapal Di Sekupang),” J. Civ. Eng. Plan., vol. 1, no. 1, p. 7, 2020, doi: 10.37253/jcep.v1i1.721.
R Khalid, JW Soetjipto, TM Maliq, "Penerapan BIM pada Perencanaan Gedung Perkantoran untuk Mendeteksi Clash Detection dan QTO Pekerjaan Struktur", Journal of Ikatan Ahli Manajemen Proyek Indonesia, Vol 2., No. 1, pp. 1-12, 2024.
1.png)
2.png)
