Model Perencanaan Pemeliharaan Bangunan Gedung Menggunakan Building Information Modeling (BIM)
Keywords:
Building Information Modeling (BIM), Building Maintenance, Limble CMMS, Autodesk Revit, Building Aset ManagementAbstract
The rapid development in Indonesia is marked by the increasing needs and supporting infrastructure. In its development, the need for facilities and infrastructure should be accompanied by good maintenance management so that the economic life of the building can be maintained. This study aims to develop a building maintenance planning model based on Building Information Modeling (BIM) and Computerized Maintenance Management System (CMMS) technology. The case study was conducted at the Agrotechnopark Laboratory Building, University of Jember, using Autodesk Revit 2024 software for three-dimensional architectural modeling and the Limble CMMS application for building maintenance simulation. The data includes technical drawings (DED), field inspection results, and maintenance standard documents based on PUPR Regulation No. 24/PRT/M/2008. The modeling results show an accurate volume of work, including a wall area of 4749 m², a floor of 3487 m², a ceiling of 2064 m², and a total of windows and doors calculated per unit. Limble CMMS allows the integration of maintenance data, preventive and corrective scheduling, and digital recording of building history. This model has been proven to increase the efficiency of building maintenance management and can provide early warning for maintenance actions, making it very relevant for application to public facility buildings.
References
Soetjipto, J. W., Zarkasi, I. K., & Trisiana, A. (2023). Model Perancangan Pemeliharaan Bangunan Gedung Menggunakan Building Information Modeling (BIM). Jurnal Permukiman, 18(1), 1–15. https://doi.org/10.31815/JP.2023.18.1-15
Permen Pu. (2008). Peraturan Menteri Pekerjaan Umum No 24/PRT/M/2008 Tentang Pedoman Pemeliharaan dan Perawatan Bangunan Gedung.
Ganindyatama, Y. J., Waluyo, R., Aditama, S., & Uda, K. A. (2023). Perancangan Model Struktur Bangunan Ruko Bertingkat di Lahan Gambut Menggunakan Metode Building Information Modelling. In Jurnal Basement (Vol. 1, Issue 1).
Setiawan, R., Arifin, S., & Trisiana, A. (2024). Quantity Take Off Pada Proyek Pembangunan Gedung Icu Rsud Ngudi Waluyo Blitar Menggunakan Bim Revit. Journal of Ikatan Ahli Manajemen Proyek Indonesia, 2(1), 37-48.
Afandi, S., Wiswamitra, K.A., & Trisiana, A. (2024). Pemodelan Strukur Bawah Gedung dan Monumen Reog Ponorogo Menggunakan Metode Building Information Modeling (BIM). Journal of Ikatan Ahli Manajemen Proyek Indonesia, 2(1), 49-58.
Panov, S., Nikolov, A., & Panova, S. (2021). Review of Standards and Systems for Predictive Maintenance.
Mellynia Saputri. (2023). Penerapan Building Information Modeling (BIM) Quantity Material Take Off.
Anggaran, D., Struktur, B., Arsitektur, D., Kasus, S., Gedung, :, Ogi, D., Irawan, P., Trisiana, A., Sukmawati, S., Sipil, J. T., Teknik, F., & Jember, U. (2021). Penerapan Building Information Modeling (BIM) Dalam Analisis Waktu. 2(1), 35–39. http://journal.isas.or.id/index.php/JACEIT
Wawan Yuriawan. (2023). Penerapan Metode Building Information Modeling (BIM) Pada Struktur Pembangunan Gedung Sistem Ujian Online dan Arsip UPBJJ-UT Lampung.
KemenPUPR. (2018). Modul 1 Kebijakan yang Terkait Perencanaan Konstruksi Dengan Sistem Teknologi BIM.
Sari, D. N., Soetjipto, J. W., & Arifin, S. (2022). Analisis Manajemen dan Estimasi Biaya Pemeliharaan Gedung Kantor Bupati dan Dewan Perwakilan Rakyat Daerah Kabupaten Pamekasan. Jurnal Ilmiah MITSU (Media Informasi Teknik Sipil Universitas Wiraraja), 10(2), 83-92.
Widiasanti, I., & Nugraha, R. E. M. (2017). Kajian Pengelolaan Pemeliharaan dan Perawatan Gedung Perguruan Tinggi: Studi Kasus Universitas Negeri Jakarta. Jurnal Teknologi Rekayasa, 1(1), 41-46.
1.png)
2.png)
